Skip to main content

Posts

Showing posts with the label Water Boils Without Fire

Kids Projects at Home

Simple Kids Crafts is a video blog dedicated to reviving the old art of handicrafts for people of all ages. How do oil spills affect aquatic plants? A Miniature Solar Panel Fire Water Balloon Make Clouds in a Bottle Secret Messages Make a Rocket Make a Hovercraft Make an Anemometer Make a Sundial Make a Radio Make an Electroscope Make a Stethoscope Make a Telescope Make a Periscope Make a Camera Bending a stream of water with a comb Lighting a bulb without electricity Simple Motor Cotton Ball Rocks? Salt-Absorbing Art and Science Color Changing Glue Art Baking Soda Clay Oil Sun Catcher Grow a Pineapple Plant! Bead Bowls Wow, what an Air-Gun Funny Diver ! Water boils without fire Ice with Boiling Water Water that boils instantly Water boils in a Paper Pot Soap-driven Boat Pulse Moves Pin Pretty Garden—without Plants Picture made by Fire Magic Pictures Dancing Doll Smoke Goes Down The Dancing Coupl The Umbrella Dance Magic Butterfly Colorful ...
1 comment
Read more

Water boils without fire

Articles Required : One round-bottom flask with a tight-fitting cork, water and arrangement to heat it. We all know that water boils at 100° C. But this fact is not true in all the conditions. So we can say that the boiling point of water is 100° C at the sea-level under normal condi­tions. So higher you go, the air pres­sure decreases correspondingly, and as a result the water boils at a much lower temperature. By the same principle, deeper one goes the boiling point of water increases correspondingly. So, if you want to prove this fact through experiment just fill your flask with water and put on fire to heat. Now when the water begins to boil, and the flask is full of steam produced by the boiling water, tighten the cork on its mouth. Remove it from the fire and hang the flask upside-down as shown in the figure here and make sure that the water is not boiling now. Once the water surface-is quiet, just squeeze some cold water on its top with the help of a cloth piece. But ...
Post a Comment
Read more

Popular posts from this blog

Grow a Gummy Bear

This is a neat and easy science project for younger children. All you need is a package of gummy bears, some small see-through containers, water, and a marker. The time frame for this project can vary depending on how much time your child is given for the project. The project can be done in as little as a week (7 days) or it can be stretched out over a couple of months. Here are the basics: Take the small containers and the marker. Label the containers for the number of days your child is going to do the project. (Day 1, Day 2, Day 3, etc.) I recommend empty baby food jars with lids since the day can be written on the lid. Fill the containers about half full of water – cold or room temperature, not hot. For each day of the project, drop a single gummy bear into one jar and close the lid. I sorted my gummies by color, but this is optional.) Store containers in a cool space so that the water in the container does not get too warm and melt the gummy bear. (I stored the...
Post a Comment
Read more

Fooling Your Brain with a Mirror

Aim: To prove that what we see is often affected by what we expect to see with the help of the mirror image experiment. Materials required: 1. Mirrors – 2 in number, square in shape, 12 inches (30 cm) a side, could be either made out of plastic or glass. 2. Epoxy glue and duct tapes. 3. Wooden dowels – 2 in number with diameter as 1 inch (2.5 cm) and 12 inches (30 cm) long. Procedure: 1.      Stick the mirrors together by pasting their backs. If you have a glass mirror then for safety, tape their edges using the duct tapes to seal the sharp edges. Take the two wooden dowels and paste them right in the centre of the mirrors vertically. 2.      Hold the dowels with each hand and as you look at one side of the mirror move the hand which is on the other side. What do you actually see? What happens? Your brain expects the image in the mirror to move as it is fooled to believe that the image it sees is actually your othe...
Post a Comment
Read more

Unleash the Power of the Pinwheel

Objectives/Goals The objective is to determine if the orientation to the wind affects the amount of power generated by a wind turbine. Methods/Materials A wind turbine was constructed using an empty oatmeal canister weighted with heavy bolts to keep it grounded, a wooden skewer, a homemade rotor, two feet of thread, one end secured to the aft shaft and the other to five #1 size paper clips. Using a hair drier, wind was directed toward the rotor at the following angles; 0 deg., 45 deg., 90 deg., 135 deg., and 180 deg. The time to raise the load of paper clips to the base of the shaft was calculated in seconds, using a stopwatch, and the distance the paper clips were raised at each position was measured in inches, using a tape measure, but then converted into meters. After conducting three trials, times and distances were averaged to determine which orientaion to the wind source created the most power. Results After testing all five angles three times, I#ve found ...
Post a Comment
Read more